Standard Horizon StitchLiner 5500

The Standard Horizon StitchLiner bridges the production gap between existing flat sheet collating / bookletmaking systems and conventional high-volume saddlestitching lines. Offset or digitally printed flat-sheet signatures are fed from the Standard Horizon SpeedVAC collator to produce true saddlestitched booklets with full bleed trimming, at speeds up to 11,000 two-up booklets per hour. Professionally finished booklets up to 200 pages (50 sheets) are fully comparable with booklets produced by traditional saddlestitchers. Can also be equipped with the HOF high-speed sheet feeder for digitally collated output (up to 27,000 sheets per hour) with guaranteed document integrity using mark, bar code, or CCD camera verification.

S p e c i f i c a t i o n s

• Sheet Size:
  Max. 350(W) x 500(L) mm (13.7" x 19.6")
  Min. 140(W) x 206(L) mm (5.6" x 8.2")
  (Optional support guide is required to the VAC-100 under 148 mm (5.9") in width.)

• Sheet Weight Range:
  Normal Paper : 60 to 210 gsm
  Coated Paper : 80 to 210 gsm

• Stitch Thickness: Max. 5 mm (0.2") (Book Thickness 10 mm (0.4"))

• Stitch Distance: 66 to 150 mm (2.6" to 6")

• Stitch Head:
  Standard Equipment: 2 (Optional stitching head is available for 4 stitches.) *1

• Stitch Wire Range:
  #23 to #25 (0.6 mm to 0.5 mm)
  Option #25 to #27 (0.5 mm to 0.4 mm) *2

• Booklet Size (Before Trim) (Head-Foot x Fore-edge):
  Max. 350 x 250 mm (13.7" x 9.8")
  Min. 140 x 103 mm (5.6" x 4.1")

• Booklet Size (After Trim):
  Fore-edge - 95 to 230 mm (3.8" to 9")
  Head-Foot - 144 to 312 mm (5.7" to 12.2")
  120 to 152 mm (4.8" to 5.9")
  186 to 312 mm (7.4" to 12.2")
  90 to 153 mm (3.6" to 6")

• Trimming Width: 2 to 25 mm (0.08" to 1")

• Production Speed:
  5,500 / 5,000 / 4,400 / 3,700 / 2,900 booklets (1 block feeding) *3

• Voltage / Frequency:
  3-Phase 200 V, 50 / 60 Hz, 220 V, 60 Hz, 400 V, 50 Hz

• Rated Current *4:
  3-Phase 200 V, 50 Hz 9.4 A (Max. 17 A), 60 Hz 8.9 A (Max. 17 A)
  3-Phase 220 V, 60 Hz 8.6 A (Max. 13 A)
  3-Phase 400 V, 50 Hz 4.7 A (Max. 9 A)

• Power Consumption *4:
  3-Phase 200 V, 50 Hz 2.6 kW, 60 Hz 2.5 kW
  3-Phase 220 V, 60 Hz 2.6 kW
  3-Phase 400 V, 50 Hz 2.6 kW

• Machine Weight:
  ACF-30 - 260 kg (573.3 lb)
  SPF-30 - 760 kg (1,675.8 lb)
  HTS-30 - 1,000 kg (2,205 lb)
  TB-30 - 100 kg (220.5 lb)
  
  *1 3 stitches are available as factory option.
  *2 Optional stitching head is required.
  *3 Production speed will be lower in multiple block feeding.
  *4 Not include VAC-100 and ST-40.