Challenge Titan 200M

• 20" Cutting Width, 3-1/4" Clamp Opening
• Hydraulic Clamping & Cutting
• Adjustable Clamp Pressure
• Line-Light Cut Position Indicator (optional)
• Safety Devices - Plexiglas Safety Shield and Two-Hand Cut Buttons
• Plexiglas Rear Table Safety Shield
• Heavy Duty Casters
• False Clamp Plate (optional)
• Cast Iron and Steel Construction
• 12" x 19" Side Tables (optional)
• Digital LED Backgauge Position Indicator
• Manually Controlled Backgauge With Lock
• Energy Efficient - Motor Runs Only When Cutting

S p e c i f i c a t i o n s

• Maximum Cutting Width: 20" / 50.8cm
• Minimum Cut: without false clamp plate 1/2" / 13mm
  with false clamp plate 1-7/8" / 48mm
• Maximum Cut Depth: 20" / 50.8cm
• Clamp Opening: without false clamp plate 3-1/4" / 8cm
  with false clamp plate 3" / 7.6cm
• Clamping Method Hydraulic Power
• Backgauge Control Manual

DIMENSIONS

• Table Space: in front of knife 16" / 40.6cm
  behind knife 20" / 51cm
• Overall Height 53" / 135cm
• Overall Width 36" / 91cm
• Overall Length 49-5/8" / 126cm
• Net Weight (approximate) 755 lbs / 343 kg
• Shipping Weight (approximate) 950 lbs / 432 kg

ELECTRICAL
Standard Motor

• 3/4 H.P. 1 Phase, 60 Hz, AC
• 120 Volts, 12 Amps (service size 15 Amps)
• Requires receptacle type: NEMA 5-15R
• U.L. Listed

Optional Motor

• 1-1/2 H.P. 1 Phase, 60 Hz, AC
• 230 Volts, 12 Amps (service size 15 Amps)
• Requires receptacle type: NEMA 6-15R or 6-20R
• U.L. Listed