Challenge MS-10A Multi-Spindle Drill

• High Production Multi-Hole Drilling
• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation
• Easy Head Adjustment
• Variable Speed Stroke Control
• Automatic Paper Chip Removal
• Rugged Cast Iron Construction
• Flexible Side Guide Adjustments
• Multi-Splined Drive Shaft
• Backgauge Adjustments
• Lighted Work Surface

S p e c i f i c a t i o n s

• Maximum Number of Drill Heads: 10 Heads
• Drill Sizes Available** (2" capacity): 1/8" to 1/2" / 3 to 13 mm
• Drill Sizes Available (2-1/2" capacity): 1/4" to 1/2" / 6 to 13 mm
• Center to Center Distance Maximum: 21" / 53 cm
• Center to Center Distance Minimum***: 1-1/4" / 3.2 cm
• Minimum Distance Between Holes w/ Adj. Stops: 3/8" / 9.5 cm
• Minimum Distance Between Holes w/ Fixed Gauges: 1/4" / 6 mm
• Maximum Drilling Capacity: 2-1/2" / 6.35 cm
• Strokes per Minute (adjustable): 18 to 26
• Backgauge Adjustment: 0 to 9" / 0 to 23 cm
• Vertical Adjustment of Individual Heads: 1/4" / 6 mm
  

DIMENSIONS

• Table Size: 24" x 36" / 61 x 91 cm
• Table Height: 38" / 96.5 cm
• Overall Height: 60" / 152 cm
• Floor Space Needed: 35" x 40" / 89 x 102 cm
• Net Weight (approximate): 1350 lbs / 675 kg
• Shipping Weight (approximate): 1660 lbs / 830 kg

ELECTRICAL
Standard

• 3 Phase, 60 Hz, AC. Pump: 3/4 HP. Spindle Motor: 3 HP.
• 208 Volts, 14 Amps (service size 20 Amps)
• 230 Volts, 12.8 Amps (service size 20 Amps)
• 460 Volts, 6.6 Amps (service size 15 Amps)
  

Optional

• 1 Phase, 60 Hz, AC. Pump: 3/4 HP. Spindle Motor: 3 HP
• 208 Volts, 26.5 Amps (service size 40 Amps)
• 230 Volts, 24.2 Amps (service size 40 Amps)
  ** Special large hole drilling (up to 1-3/4" in diameter) is possible with conversion kit.
  *** Three hole drilling heads are available for drilling 3 holes in 1" centers.